Elekon MC32W Microphone Cable for Wind Turbine

SKU
11190
£211.00 Ex. VAT
This item is currently out of stock but you can still place a backorder. We expect to deliver your order within 7 working days. If you need it sooner or have any questions, please contact us.
Out Of Stock

The Elekon MC32W provides easy mounting on wind turbines.

or

If you undertake bat surveys around wind farms the MC32W adaptor may be a useful addition to your kit. The MC32W provides easy mounting from the inside of the metallic WKA gondola and transmission of the microphone and GSM signal to the outside. The integrated tone generator offers a reliable, unattended operation. With daily test measurements, the functioning of the microphone can be monitored and quickly responded to any defects or sensitivity reduction - the signal/noise ratio gives a good indication about the microphone condition - ensuring that no bat call recordings will be lost due to a defective microphone. When using a BATLOGGER C with SMS/Email notification, the microphone test result is included in the daily status message.

Key features:

  • Mount, protect, and test the ultrasonic microphone of a BATLOGGER device
  • Built for long-term outdoor use
  • Enables the reliable operation of the BATLOGGER in unattended mode
  • External mounting for GSM antenna
  • The microphone can be placed independently from the BATLOGGER to ensure optimal acoustic reception while allowing inconspicuous placement

Placement of the MC32W:

Choose an appropriate mounting place in the gondola. It is not possible to specify an exact place here, as there are a lot of different wind turbine types available.

To increase the life of your microphone, it should always be mounted with the opening facing the ground up to a maximum horizontal position to prevent moisture accumulation inside. Use a tripod or similar to easily mount and direct the microphone as needed.

Also, consider the surroundings of the microphone. Close objects or surfaces may reflect sound and distort recorded bat calls.

Technical Specifications:

Length (m): 5
Connector: 5-pole
GSM: 5m, SMA connectors

Dimensions (mm): Ø76 x 28, without cable
Feedthrough (mm): Ø50
Weight (g): 442
Weather protection: IP67
Operating conditions -10..+50°C, 10..90%RH (non condensing)
Storage conditions -20..+60°C, 5..95%RH (non condensing)
Plug: M12, 3.5mm

Integrated test function:
Transducer (kHz): 32
Modes: Automatic, Manual

If you are using the MC32W with the Batlogger C with a SIM card to send SMS/email in a wind turbine Elekon advises to mount the LTE antenna supplied in the Batlogger outside the turbine with the microphone to increase the reception.

 

 

 

 

Delivery & Returns

Shipping is calculated at checkout based on order weight, product type and delivery postcode. Prices exclude VAT.

Delivery times

UK mainland 1 to 3 working days for orders placed before 2pm
Scotland, Northern Ireland & UK offshore areas 2 to 5 working days for orders placed before 2pm
Europe 3 to 5 working days for orders placed before 2pm
Rest of world 7 to 14 working days for orders placed before 2pm

Delivery costs

UK mainland: delivery starts from £7.92.

Highlands and Islands: delivery starts from £25.

Northern Ireland: delivery starts from £20, rising to £90 for orders up to 60kg.

Larger orders, pallet deliveries and some offshore or international deliveries may require a quote.

For European orders, please visit wildcare.eu, call +33 (0)4 65 65 00 05 or email [email protected].

Need it by a certain date?

Please tell us when ordering. For urgent orders, call 01451 833181.

Returns

If your order arrives damaged or incorrect, please contact us within 5 working days.

A Returns Number may be required before sending goods back. Call 01451 833181 or email [email protected].

Please see our full returns policy for more information.